OCING! ftmfw! questions

[itzdylan24]

so as you may know i finshed my computer maybe a month back.

i got
680i se evga mobo
e6750 @ 2.66
2 1gb corsair 6400
and other shit.

right now i have stock fan on my processor and i looked in the bios my temps are at 33c which i think is good right?

any ways i wanna boost it up a little bit

do you recommend ocing since i got a stock cooler

 

[Rudster8161]

you can raise the fsb bus up all you want, just DONT up the voltage and your temps should be fine

 

[esa193]

what he said
raising fsb ull get 3 ghz n/p

 

[Cabbs]

You will hit a wall without raising voltages, so eventually you are gonna have to if you want to go farther.

 

[esa193]

ya but what do u need past 3ghz?

 

[mammikoura]

temps are pretty good. But the under load temp is more important than the idle temp. So keep an eye on that when oc'ing.
But if you want to then just try oc'ing. I don't think you will have problems with temperatures.

 

[Rudster8161]

the BIOS isnt idle for some reason, it puts a decent load on the cpu for a reason that baffles even the likes of me. i say its about a 30%-50% load on the cpu while your in the bios. i would say idle his temps are high 20's to low 30's

 

[Cabbs]

ya but what do u need past 3ghz?

Well why not? It's not like raising voltages will destroy your hardware. That only happens when you go to extremes, like I did with my BadAxe 2 mobo.

 

[itzdylan24]

thanks for the help so far. wat about the ram? wats witht the timing shit

 

[itzdylan24]

i went into the bios to change the fbs thing. so there was somthing that siad minimm 400 and 2500 max. so i put 2000. nothing changed err wat