Jason8284
Daemon Poster
- Messages
- 535
I talked my Dad into letting me build his computer Is this setup okay?
-MassCool NexTherm CS-ICS8200 Black ATX Mid-Tower Case wth Built-in Air Conditioning
-ASUS P5N-E SLI LGA 775 NVIDIA nForce 650i SLI ATX Intel Motherboard - Retail
-Intel Core 2 Duo E6850 Conroe 3.0GHz 4M shared L2 Cache LGA 775 Processor - Retail
-CORSAIR CMPSU-620HX ATX12V v2.2 and EPS12V 2.91 620W Power Supply 100 - 240 V UL, CUL, CE, CB, FCC Class B, TUV, CCC, C-tick – Retail
-EVGA 640-P2-N821-AR GeForce 8800GTS 640MB 320-bit GDDR3 PCI Express x16 HDCP Ready SLI Supported Video Card – Retail
-CORSAIR XMS2 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory - Retail
-Western Digital Caviar SE16 WD2500KS 250GB 7200 RPM 16MB Cache SATA 3.0Gb/s Hard Drive - OEM
-Windows Vista Home Prem. 32-bit
I know people are going to say get a 680i chipset, but my father is not going to be overclocking at all, and the 650i was cheaper and I'm very familiar with that board since I have it already. If you have any other ideas, I'm very open to different ideas. I'm trying not to go over this budget, but willing to change a few things if needed. Thank you.
-MassCool NexTherm CS-ICS8200 Black ATX Mid-Tower Case wth Built-in Air Conditioning
-ASUS P5N-E SLI LGA 775 NVIDIA nForce 650i SLI ATX Intel Motherboard - Retail
-Intel Core 2 Duo E6850 Conroe 3.0GHz 4M shared L2 Cache LGA 775 Processor - Retail
-CORSAIR CMPSU-620HX ATX12V v2.2 and EPS12V 2.91 620W Power Supply 100 - 240 V UL, CUL, CE, CB, FCC Class B, TUV, CCC, C-tick – Retail
-EVGA 640-P2-N821-AR GeForce 8800GTS 640MB 320-bit GDDR3 PCI Express x16 HDCP Ready SLI Supported Video Card – Retail
-CORSAIR XMS2 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory - Retail
-Western Digital Caviar SE16 WD2500KS 250GB 7200 RPM 16MB Cache SATA 3.0Gb/s Hard Drive - OEM
-Windows Vista Home Prem. 32-bit
I know people are going to say get a 680i chipset, but my father is not going to be overclocking at all, and the 650i was cheaper and I'm very familiar with that board since I have it already. If you have any other ideas, I'm very open to different ideas. I'm trying not to go over this budget, but willing to change a few things if needed. Thank you.