Ok, first of all, here are the specs:
Q6600 CPU
8800GTS 640 MB GPU
Abit IP35 Pro Mobo
OCZ ddr2 2 gig ram
Corsair 620 watt PSU
Western Digital Raptor HD
Now, I have tried taking out the GPU, CPU, and RAM and reinstalled/reset them all. I tried resetting the CMOS. I disconnected my HD and CD drive and tried to boot witht hose disconnected and nothing. I disconnected and reconnected all of the power connections.
The Symptoms: When I boot I get single long beeps coming from the case speaker. My monitor doesn't come out of stand by mode, and obviously I get no posting or any kind of display at all. The POST code detector on the mobo stopS on "C1", which I belive is something to do with the RAM and/or the GPU.
Any ideas on what the problem might be or ways of narrowing it down? I really don't have any other computers that will accept the RAM or GPU so that I can test them. My first and second build went smoothly. This one, not soo much
Q6600 CPU
8800GTS 640 MB GPU
Abit IP35 Pro Mobo
OCZ ddr2 2 gig ram
Corsair 620 watt PSU
Western Digital Raptor HD
Now, I have tried taking out the GPU, CPU, and RAM and reinstalled/reset them all. I tried resetting the CMOS. I disconnected my HD and CD drive and tried to boot witht hose disconnected and nothing. I disconnected and reconnected all of the power connections.
The Symptoms: When I boot I get single long beeps coming from the case speaker. My monitor doesn't come out of stand by mode, and obviously I get no posting or any kind of display at all. The POST code detector on the mobo stopS on "C1", which I belive is something to do with the RAM and/or the GPU.
Any ideas on what the problem might be or ways of narrowing it down? I really don't have any other computers that will accept the RAM or GPU so that I can test them. My first and second build went smoothly. This one, not soo much