Jk
In Runtime
- Messages
- 236
Hello everone ive been overclocking my computer and ive been able to hit 2.55ghz stable but if I try to hit 2.6 then no matter how much voltage i put into it, it will not run stable. Im wondering if im doing something wrong or if this is just the most my system will run. My System is in my sig and this is what im running.
---------------
Cpu:
255mhz
multiplier x10
1.5125v
---------------
Chipset:
1.6v
---------------
HT:
4x
1.25v
---------------
DDR:
2.8v
333mhz
TCL -2.5T
TRAS -8T
TRCD -3T
TRP -3T
TRC -11T
TRFC -14T
TRWT-4T
TWR -2T
1T Timing
---------------
Voltages:
Vcore -1.55v
3.3v -3.38v
5.0v -4.92v
12.0v -11.97v
I got These readings off of pc probe 2
---------------
Temps:
Cpu: Idle -30c
Load -42c
Chipset: Idle -30c
Load -31c
---------------
Other:
Pci Express Clock -100mhz
Pci Clock Sync -to 33.33
---------------
CPUz says that my memory runs at 212mhz and the memory is supposed to be run at 200mhz ive tried underclocking it to 138mhz and then trying 2.6 but it is not stable. It seems stable but superpi gives me errors.
There you go. I tried to give you all my info if you see something that should be changed then let me know. Thanks in advance.
---------------
Cpu:
255mhz
multiplier x10
1.5125v
---------------
Chipset:
1.6v
---------------
HT:
4x
1.25v
---------------
DDR:
2.8v
333mhz
TCL -2.5T
TRAS -8T
TRCD -3T
TRP -3T
TRC -11T
TRFC -14T
TRWT-4T
TWR -2T
1T Timing
---------------
Voltages:
Vcore -1.55v
3.3v -3.38v
5.0v -4.92v
12.0v -11.97v
I got These readings off of pc probe 2
---------------
Temps:
Cpu: Idle -30c
Load -42c
Chipset: Idle -30c
Load -31c
---------------
Other:
Pci Express Clock -100mhz
Pci Clock Sync -to 33.33
---------------
CPUz says that my memory runs at 212mhz and the memory is supposed to be run at 200mhz ive tried underclocking it to 138mhz and then trying 2.6 but it is not stable. It seems stable but superpi gives me errors.
There you go. I tried to give you all my info if you see something that should be changed then let me know. Thanks in advance.