ericf19931
Daemon Poster
- Messages
- 671
my dvd rom cant be detected when my cd burner is connected. when my burner is not connected, then it gets detected. any ideas on why this is happening?
i put them onto cable select is that ok?joxley1990 said:Sounds like jumpers..make sure the primary drive, has the jumper in the master position, and make sure the secondary drive, has the jumper set in the slave position. Sounds like they are both on master or slave, or on cable select or something..
i tried it and it doesnt work any ideas?DTM 13 said:I have always had better luck setting the jumpers.They both should have a jumper on them already.Just look at the diagram on both they will tell you where to set them.One on Master one on Slave.
the drive that cant be detected isnt there though~mr mixx~ said:ok try this: click start / right click my computer and highlight manage, and hit enter / once there, click on devise manager , where it say's dvd/cd rom drives..
open the tree to it, and it will display your cr rom/dvd drives / now, right click the drive your having trouble with and un-install it. / that's it / now just reboot.
when your computer re-loads it will automatically detect the drive and install the driver's to it. once it does that, shut down and reboot again. now you should be all set to go.