Case design I came up with: 3D Latest :)

[Kage]

Just make sure all the parts are the best of the best

Thats graphics cards/RAM/Sound/Motherboard/Hard drives/PSU, etc

 

[h25520062]

It looks so real.

 

[joxley1990]

You should pay to have the case made, in real life..

 

[MooseMan1]

Intel Setup

Motherboard: Intel D975XBX

Processor: Intel Core 2 Extreme X6800 (2.93GHz 1066FSB, 4MB L2)

RAM: CORSAIR XMS2 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800
Link: http://www.newegg.com/Product/Product.asp?Item=N82E16820145038

Video: 2X ATI Radeon X1900 CrossFire Edition 512MB 256-bit GDDR3 PCI Express x16
(crossfire setup)
Link: http://www.newegg.com/Product/Product.asp?Item=N82E16814195001

Audio: Creative Sound Blaster X-Fi Elite 7.1 Channels 24-bit 96KHz
Link: http://www.newegg.com/Product/Product.asp?Item=N82E16829102191

Hardrive: 2X Seagate Barracuda 7200.10 ST3320620AS (Perpendicular Recording Technology) 320GB 7200 RPM 16MB Cache SATA 3.0Gb/s in raid 0 array
Link: http://www.newegg.com/Product/Product.asp?Item=N82E16822148140

Powersupply option 1:
ENERMAX Liberty ELT620AWT ATX12V 620W
Link: http://www.newegg.com/Product/Product.asp?Item=N82E16817194004

Option 2: (hehe)
TURBO-COOL® 1KW
Link: http://www.pcpowercooling.com/products/viewproduct.php?show=TC1KW

Heatsink: ARCTIC COOLING Freezer 7 Pro
Link: http://www.newegg.com/Product/Product.asp?Item=N82E16835186134

Disk Drive: PLEXTOR Black burn a bunch of stuff at speeds drive, lol(yes it's slot load)
Link:http://www.newegg.com/Product/Product.asp?Item=N82E16827131352

multifunction thing:
Koutech KW-F7210-B 9-in-1
Link: http://www.newegg.com/Product/Product.asp?Item=N82E16820162408

Fan controller:
Sunbeam Chromatic Windmill
Link: http://xoxide.com/sunbeam-chormatic-windmill-black.html

Wire loom:
Techflex Wire Sleeving Kit (Chrome)
Link: http://xoxide.com/techflex2.html

--

i am going 2 add some accesories and stuff in a bit, but i have 2 deliver something first (work)

EDIT: Disk drive, multifunction, and fan controller added, i thought slot load would be a cool feature for your awesome case

EDIT2: Wire loom added! i may be going overboard but it's fun!

 

[Kage]

Hehe, looking good.

I like the RAM. Thats the stuff that has lights on it

Anymore setups? Like I said, moneys not an issue at all, of course.

h25520062, thanks alot I spend alot of time rendering (actually...thats pretty much all I do), so its just all about tinkering with lights/HDR's etc, and of course, Global Illumination (light tracer does the same thing)

As for building the case in real life, I guess its possible to tell the truth.

 

[nstepho]

Wow that 3d render thing looked incredible. I used 3d studio max once, I made a sphere and a cylinder that both had no textures and floated in mid air with no light. So yours looks slightly better....

EDIT: woot! new sig!

 

[Kage]

Thanks for that then...I think

As for the sig, thats pretty funny, haha

 

[MooseMan1]

Hehe, looking good.

I like the RAM. Thats the stuff that has lights on it

Anymore setups? Like I said, moneys not an issue at all, of course.

h25520062, thanks alot I spend alot of time rendering (actually...thats pretty much all I do), so its just all about tinkering with lights/HDR's etc, and of course, Global Illumination (light tracer does the same thing)

As for building the case in real life, I guess its possible to tell the truth.

yea i could never do that well i guess i might be able 2 but it would take along time....and a lot of classes lol. The only thing i noticed is that when u put the case on it's side the light blue turned a little 2 dark....or maybe it's just me

 

[nstepho]

As for the sig, thats pretty funny, haha

Haha sadly enough I started writing the actual specs of my computer, but I couldn't be stuffed with all the motherboard models and crap everyone else has, so that sig was the result.

 

[MooseMan1]

i updated the list with some stuff so check it out!