kevinscallan
Baseband Member
- Messages
- 38
On this pic above. The Wires on the motherboard go to certain pin headers on the motherboard. You have to make sure that they are connected to the right pins and the wire connectors are the right way around because if they are not the the LED's will not work because they will only work one way. If you have still got your installation manual for your motherboard it will tell you which way around they should be fitted.
Do not fit tape on any part of the motherboard as the surfaces can get hot of other parts and sometimes cause fires. The best way to get your motherboard away from the case is to use motherboard riser legs which i have got small ones with screw protectors.
Do not fit tape on any part of the motherboard as the surfaces can get hot of other parts and sometimes cause fires. The best way to get your motherboard away from the case is to use motherboard riser legs which i have got small ones with screw protectors.