OK, I decided to try a Green PC Led on the PSU to see if it would work.
First, I removed the plastic plug, so the two wires could be free.
Second, I plugged the green wire with the red wire on the power molex.
Then, I plugged the white one with the black as it is ground.
Next, when I power it on, The GREEN led appears RED with a little yellow and if I leaveit for a half a second, it slowly fades to off. Am I burning something???
Or, do I have to remove the two metal thingys on each wire???
First, I removed the plastic plug, so the two wires could be free.
Second, I plugged the green wire with the red wire on the power molex.
Then, I plugged the white one with the black as it is ground.
Next, when I power it on, The GREEN led appears RED with a little yellow and if I leaveit for a half a second, it slowly fades to off. Am I burning something???
Or, do I have to remove the two metal thingys on each wire???