brianiscool
Beta member
- Messages
- 2
Selling new 550Watt and 680 Watt power supply
Selling my power supplies new in box never opened. One is a
Power Magic 550 Watts
Specifications:
AC Input: 115/230V, 8/4A, and 60/50Hz.
DC Output: +3.3V-24A, +5V-36A, +12V-16A, +5VSB-2A, -5V-0.5A, -12V-0.8A.
Four (4) IDE power connectors and one (1) floppy drive power connectors,
+12V power connector
Meets Intel Pentium 4's minimum power supply wattage requirement of 300 watts.
Works with Intel's Pentium 4 systems.
Works with AMD's Duron/Athlon systems.
Works with any Intel Pentium III or Celeron processor based system.
Automatic fan speed control (AFC) with built-in temperature sensor.
Designed for PC, server, and industrial applications
Built-in Triple Protectiontm: Over Voltage Protection,
Over Power Protection, Short Circuit Protection.
Complies with FCC part 15J class B 115VAC operation and CISPR 22 230 VAC operation
Features:
â—‡ Compatible with Intel ATX 12V: P4 Prescott & AMD processors
â—‡ Auto or manual switch select Input voltage
â—‡ Fan Speed Control Function Inside
â—‡ Low acoustic noise & ripple
â—‡ Remote On/off Control function
◇ MTBF: More than 50k hours at 70% of full rated load; 25℃ ambient
â—‡ EMC: FCC part 15 Class B, EN55022 Class B, EN61000-3-2 Class B
â—‡ Safety Certs: TUV, CB, CE, RU, UL
â—‡ Dimension:150*86*140mm (W*H*L)
Specifications:
â—‡ PFC: without
◇ Operating temp.: +10℃~ +50℃
â—‡ Transient response: output voltage recovers in less than 1 ms max. following a 25%load change
â—‡ Hold-up time: t5>17 mS at 100% Load
â—‡ Humidity: 5~90% RH
â—‡ Efficiency: 65% min. 70% typical, at full load
â—‡ P.G. signal: 100mS500mS at 100% Load.
â—‡ P.F. Signal: 1mS MIN
â—‡ Over Load Protection: +5V:26A-36A /32-40A/ 38-45A
â—‡ Over Voltage Protection: +5V:6.8V,+3.3V:4.5V,+12V:15.6V
â—‡ Short Circuit Protection: All output to GND
â—‡ Hi-Pot: Voltage 1500Vac, Time 2-3 Sec. cut off current 10mA MAX.
â—‡ AC Input: 115/230V, 8/4A, and 60/50Hz.
â—‡ DC Output: +3.3V-24A, +5V-36A, +12V-16A, +5VSB-2A, -5V-0.5A, -12V-0.8A.
â—‡ Four(4) IDE power connectors
â—‡ One(1) floppy drive power connectors,
â—‡ One(1) +12V power connector
â—‡ Works with Intel's Pentium 4 systems.
â—‡ Works with AMD's Duron/Athlon systems.
â—‡ Works with any Intel Pentium III or Celeron processor based system.
â—‡ Automatic fan speed control (AFC) with built-in temperature sensor.
â—‡ Designed for PC, server, and industrial applications
â—‡ Built-in Triple Protectiontm: Over Voltage Protection,
â—‡ Over Power Protection, Short Circuit Protection.
â—‡ Complies with FCC part 15J class B 115VAC operation and CISPR 22 230 VAC operation
$30 and shipping free anywhere is the United States.
Below is the image:
The other power supply is a Echo Star 680 Watt which is sealed and comes with an ATA cable.
680 Watt total
- 115VAC, 230VAC switchable power supply
- One (1) ATX power connector
- One (1) 12V ATX power connector
- Four (4) Large 4-pin Molex connectors
- Two (2) Small 4-pin Floppy connectors
- High Efficiency
- Over Current Protection
- Over Power Protection
Power Specifications:
* 115V, 230V switchable power supply
* +3.3V,45A
* +5V, 50A
* +12V, 22A
* -12V, 0.8A
* -5V, 0.5A
* +5Vsb, 2.A
Regulatory Approvals:
* CE
* CB
* Femko
* CCC
Unit Dimensions:- 3.25 x 6 x 5.5-inches (H x W x D (approximate))
- Compatible with P4 and AthlonXP
$45 and shipping free with in the United States.
Below is the image:
Selling my power supplies new in box never opened. One is a
Power Magic 550 Watts
Specifications:
AC Input: 115/230V, 8/4A, and 60/50Hz.
DC Output: +3.3V-24A, +5V-36A, +12V-16A, +5VSB-2A, -5V-0.5A, -12V-0.8A.
Four (4) IDE power connectors and one (1) floppy drive power connectors,
+12V power connector
Meets Intel Pentium 4's minimum power supply wattage requirement of 300 watts.
Works with Intel's Pentium 4 systems.
Works with AMD's Duron/Athlon systems.
Works with any Intel Pentium III or Celeron processor based system.
Automatic fan speed control (AFC) with built-in temperature sensor.
Designed for PC, server, and industrial applications
Built-in Triple Protectiontm: Over Voltage Protection,
Over Power Protection, Short Circuit Protection.
Complies with FCC part 15J class B 115VAC operation and CISPR 22 230 VAC operation
Features:
â—‡ Compatible with Intel ATX 12V: P4 Prescott & AMD processors
â—‡ Auto or manual switch select Input voltage
â—‡ Fan Speed Control Function Inside
â—‡ Low acoustic noise & ripple
â—‡ Remote On/off Control function
◇ MTBF: More than 50k hours at 70% of full rated load; 25℃ ambient
â—‡ EMC: FCC part 15 Class B, EN55022 Class B, EN61000-3-2 Class B
â—‡ Safety Certs: TUV, CB, CE, RU, UL
â—‡ Dimension:150*86*140mm (W*H*L)
Specifications:
â—‡ PFC: without
◇ Operating temp.: +10℃~ +50℃
â—‡ Transient response: output voltage recovers in less than 1 ms max. following a 25%load change
â—‡ Hold-up time: t5>17 mS at 100% Load
â—‡ Humidity: 5~90% RH
â—‡ Efficiency: 65% min. 70% typical, at full load
â—‡ P.G. signal: 100mS500mS at 100% Load.
â—‡ P.F. Signal: 1mS MIN
â—‡ Over Load Protection: +5V:26A-36A /32-40A/ 38-45A
â—‡ Over Voltage Protection: +5V:6.8V,+3.3V:4.5V,+12V:15.6V
â—‡ Short Circuit Protection: All output to GND
â—‡ Hi-Pot: Voltage 1500Vac, Time 2-3 Sec. cut off current 10mA MAX.
â—‡ AC Input: 115/230V, 8/4A, and 60/50Hz.
â—‡ DC Output: +3.3V-24A, +5V-36A, +12V-16A, +5VSB-2A, -5V-0.5A, -12V-0.8A.
â—‡ Four(4) IDE power connectors
â—‡ One(1) floppy drive power connectors,
â—‡ One(1) +12V power connector
â—‡ Works with Intel's Pentium 4 systems.
â—‡ Works with AMD's Duron/Athlon systems.
â—‡ Works with any Intel Pentium III or Celeron processor based system.
â—‡ Automatic fan speed control (AFC) with built-in temperature sensor.
â—‡ Designed for PC, server, and industrial applications
â—‡ Built-in Triple Protectiontm: Over Voltage Protection,
â—‡ Over Power Protection, Short Circuit Protection.
â—‡ Complies with FCC part 15J class B 115VAC operation and CISPR 22 230 VAC operation
$30 and shipping free anywhere is the United States.
Below is the image:
The other power supply is a Echo Star 680 Watt which is sealed and comes with an ATA cable.
680 Watt total
- 115VAC, 230VAC switchable power supply
- One (1) ATX power connector
- One (1) 12V ATX power connector
- Four (4) Large 4-pin Molex connectors
- Two (2) Small 4-pin Floppy connectors
- High Efficiency
- Over Current Protection
- Over Power Protection
Power Specifications:
* 115V, 230V switchable power supply
* +3.3V,45A
* +5V, 50A
* +12V, 22A
* -12V, 0.8A
* -5V, 0.5A
* +5Vsb, 2.A
Regulatory Approvals:
* CE
* CB
* Femko
* CCC
Unit Dimensions:- 3.25 x 6 x 5.5-inches (H x W x D (approximate))
- Compatible with P4 and AthlonXP
$45 and shipping free with in the United States.
Below is the image:
