New rig, Error beeps at start up

[quartz01]

Hey all.. just made a new rig
Athlon 64 3000+
2X 512mb Crucial
128mb 9600xt
80gb 7200RPM 8mb buffer WD hard drive
Abit AV8
Enermax 460W PSU

when i start it all up, the fans spin and then i get one long beat followed by 3 short beeps and then it shuts of. Also, on the little "error, LCD pad" Thing I get 9F shows up. I have tried one stick of ram and the Ram in different slots, but no fix.. anyone know anything?

 

[ardy891]

Try reseating every peice of hardware!!!

 

[The_Other_One]

And it shuts off? Usally, that's some form of a video error. Make sure the video card is seated well. If you have onboard video, try using that first.

Other than that...I guess make sure everything else is in place snugly. I don't think that's a ram beep(usually just long beeps) but that could be looked at...

 

[quartz01]

oh darn.. fixed that problem. large Power connecter was in tight, but now i get a beep everyone 3 secs or so and the error message is 0.4

 

[quartz01]

Lol, i made a "noobie". Forgot to put the ram back into the 1st slot.. had it in the 3rd.. all is good now

thanks

 

[ardy891]

lol, im glad it was nothinh serious

 

[Computergen1]

for beep codes go here http://www.computerhope.com/beep.htm