Computer Pausing

e1cks

Baseband Member
Messages
34
hello, i have just built a system

(m/b ASRock K7S41gx FSB 333 , 512MB DDR 333, 80gig H/D 8mb Cache, 16X DVD-Rom)

i have made this system and it was working fine but then i had a problem with the CPU and Fan.I had to replace the CPU and fan, after that the comp waz working fine. Then i realised that the floppy drive was not connected, after connecting the floppy drive i started the computer and then it begain to crash.I have disconected the floppy and DVD and just had the hard drive on,the computer is still crashing at the system info screen just after the device reports. i have tried this on two different ASRock M/B Both are same model and the same thing is happening on both the computers does anyone have any idea as to what could possible causing my problems ?

thanks in advance
e1cks.
 
check in devise manager and tell us what it is reporting, there must be a conflict somewhere....

And be shure the cables are snug & hooked correctly, cuz if they are not, you will have probs.

also check bios, to see if it is being recognized...
 
i found the problem it waz the PCI modem, as soon as i removed, all the problems disappered. thanks for your help.

e1cks
 
Back
Top Bottom