Been putting my pc together tonight (almost there) and came across a few probs!!!!
My front panel conectors (mobo)are bewildering me!!!! i plugged in the speaker, power switch and res switch but then i got stuck!!!!
In all there are 7 connectors remaining and seven pins for them but i dont know what goes where, the connectors for the case r labelled different to the mobo!!!
The seven connectors I have r:
Gnd
Gnd
Vcc
TPA-
TPA+
TPB-
TPB+
The pins i have on the mobo are:seperated into two sections pwr led and front panel, in total i have 7 pins left, 3 pwr led and 4 front panel!
The front panel pins are:
ide activity light (+ and -)
and msg led/pwr/sleep led (+ and -)
=4
the pwr led pins i dont know anything apart from there are 3 connectors!! Please help me!!!!
The link for my mobo is here: http://tw.giga-byte.com/MotherBoard/Products/Products_GA-7N400-L.htm#
Thats so u can get the manual!!!!
In addition to this I also have one tiny prob with the front audio pins there is a wire from the case for the front audio called mic bias, there was no pin for mic bias only mic in!!! so i plugged the mic in wire to the mic in pin and the mic bias wire to the ref pin as it had no use
Thanx
My front panel conectors (mobo)are bewildering me!!!! i plugged in the speaker, power switch and res switch but then i got stuck!!!!
In all there are 7 connectors remaining and seven pins for them but i dont know what goes where, the connectors for the case r labelled different to the mobo!!!
The seven connectors I have r:
Gnd
Gnd
Vcc
TPA-
TPA+
TPB-
TPB+
The pins i have on the mobo are:seperated into two sections pwr led and front panel, in total i have 7 pins left, 3 pwr led and 4 front panel!
The front panel pins are:
ide activity light (+ and -)
and msg led/pwr/sleep led (+ and -)
=4
the pwr led pins i dont know anything apart from there are 3 connectors!! Please help me!!!!
The link for my mobo is here: http://tw.giga-byte.com/MotherBoard/Products/Products_GA-7N400-L.htm#
Thats so u can get the manual!!!!
In addition to this I also have one tiny prob with the front audio pins there is a wire from the case for the front audio called mic bias, there was no pin for mic bias only mic in!!! so i plugged the mic in wire to the mic in pin and the mic bias wire to the ref pin as it had no use
Thanx
