M mick094m Solid State Member Messages 9 Nov 10, 2004 #1 I have just changed my amd xp2000 for a xp2600 but on start up it is still showing up as xp2000, how do I get the pc to recognise it as a xp2600 motherboard is a Gigabyte Ga-7ZE Thanks in advance for any help mick
I have just changed my amd xp2000 for a xp2600 but on start up it is still showing up as xp2000, how do I get the pc to recognise it as a xp2600 motherboard is a Gigabyte Ga-7ZE Thanks in advance for any help mick
A airiox Fully Optimized Messages 2,692 Nov 10, 2004 #2 Make sure you have you FSB set to 166 in you BIOS.
T The_Other_One Daemon Poster Messages 1,321 Nov 10, 2004 #3 multiplier could also cause problems... And I thought it was 133 with a 266FSB...
A airiox Fully Optimized Messages 2,692 Nov 10, 2004 #4 nah the 2600 runs on a 166/333 bus the old thouroughbred coure runs on 133/266.
I IAntDemo xxcobraxx Messages 6,224 Location England Nov 10, 2004 #5 airiox said: nah the 2600 runs on a 166/333 bus the old thouroughbred coure runs on 133/266. Click to expand... I thought it was 133 with a 266FSB aswell o well
airiox said: nah the 2600 runs on a 166/333 bus the old thouroughbred coure runs on 133/266. Click to expand... I thought it was 133 with a 266FSB aswell o well
T The_Other_One Daemon Poster Messages 1,321 Nov 10, 2004 #6 Oh, right. I'd forgotten some of them where 333MHz ^^;
O ownage Fully Optimized Messages 4,404 Nov 10, 2004 #8 airiox said: the 3200 and some 3000 run at 200/400 Click to expand... yea all of the 3200 and some of the 3000 run at 200/400 but most of the 3000 run at 166/333.
airiox said: the 3200 and some 3000 run at 200/400 Click to expand... yea all of the 3200 and some of the 3000 run at 200/400 but most of the 3000 run at 166/333.
OP OP M mick094m Solid State Member Messages 9 Nov 11, 2004 #9 This board only supports 266 bus speed that what the cpu is, and I have set the clock jumper at 133 as I thought the multiplier was "by 2"
This board only supports 266 bus speed that what the cpu is, and I have set the clock jumper at 133 as I thought the multiplier was "by 2"