Mental Liberator
Fully Optimized
- Messages
- 2,035
Special Features
FSB 800
AGP 8X
Serial ATA
USB 2.0
6 Channel Audio
HT CPU Support
Processor
Socket 478 for Intel Pentium 4 processors
FSB
800/533/400MHz
Chipset
Intel® 848P & ICH5
LAN
RTL8100C 10/100 Mbps Faster Ethernet controller (optional)
IDE
2 UltraDMA 100 / 66
Expansion Slots
1 AGP 8X slot
5 PCI
1 CNR
Form Factors
ATX Form Factor, 305*220mm
Memory
2x184-pin DIMM sockets support two 2.5V DDR SDRAMs(DDR400/333/266)
Maximum: 2GB
Audio
ALC 655 6-channel CODEC
Compliant with AC97 2.3 specification
Back Panel I/O Ports
1 x PS/2 keyboard
1 x PS/2 mouse
1 x Parallel Port
1 x Serial Port
4 x USB 2.0 Ports
1 x RJ 45 Port
1 x Audio I/O (Line-in, Line-out and Mic-in)
Internal I/O Connectors & Header
20-pin ATX Power Supply connector
4-pin ATX 12V Power Supply connector
Dual PCI IDE interfaces, 4 IDE devices
360K~2.88M Byte, 3 Mode FDDs or LS120
1 x S/PDIF-out header, 1 x CD-in header, 1x AUX-in heaer
2 xSATA ports
2 x USB 2.0 header support additional 4 USB ports (USB3, USB 4)
HDD LED, ACPIMSG LED, Reset Switch, Power Switch headers
CPU / Power / Chassis FAN connectors
Front Panel MIC/Line-in out header
BIOS
Award 2Mb Flash EEPROM
Supports Plug and Play 1.0A, APM 1.2, Muli Boot, DMI
Full Support for ACPI revision 1.0 specification
--------------------------------------------------------
I bought a 3.0 ghz intel pentium 4 and it came with this, im building my own comp, my first one... and im 14... so i don't wanna mess all this stuff up, now it says supports (DDR400/333/266) memory for the RAM and I was just wondering, can I use a pc3200 type memory? Because thats what I bought....
If you guys can help me, THANKS!!!!!!!!!
FSB 800
AGP 8X
Serial ATA
USB 2.0
6 Channel Audio
HT CPU Support
Processor
Socket 478 for Intel Pentium 4 processors
FSB
800/533/400MHz
Chipset
Intel® 848P & ICH5
LAN
RTL8100C 10/100 Mbps Faster Ethernet controller (optional)
IDE
2 UltraDMA 100 / 66
Expansion Slots
1 AGP 8X slot
5 PCI
1 CNR
Form Factors
ATX Form Factor, 305*220mm
Memory
2x184-pin DIMM sockets support two 2.5V DDR SDRAMs(DDR400/333/266)
Maximum: 2GB
Audio
ALC 655 6-channel CODEC
Compliant with AC97 2.3 specification
Back Panel I/O Ports
1 x PS/2 keyboard
1 x PS/2 mouse
1 x Parallel Port
1 x Serial Port
4 x USB 2.0 Ports
1 x RJ 45 Port
1 x Audio I/O (Line-in, Line-out and Mic-in)
Internal I/O Connectors & Header
20-pin ATX Power Supply connector
4-pin ATX 12V Power Supply connector
Dual PCI IDE interfaces, 4 IDE devices
360K~2.88M Byte, 3 Mode FDDs or LS120
1 x S/PDIF-out header, 1 x CD-in header, 1x AUX-in heaer
2 xSATA ports
2 x USB 2.0 header support additional 4 USB ports (USB3, USB 4)
HDD LED, ACPIMSG LED, Reset Switch, Power Switch headers
CPU / Power / Chassis FAN connectors
Front Panel MIC/Line-in out header
BIOS
Award 2Mb Flash EEPROM
Supports Plug and Play 1.0A, APM 1.2, Muli Boot, DMI
Full Support for ACPI revision 1.0 specification
--------------------------------------------------------
I bought a 3.0 ghz intel pentium 4 and it came with this, im building my own comp, my first one... and im 14... so i don't wanna mess all this stuff up, now it says supports (DDR400/333/266) memory for the RAM and I was just wondering, can I use a pc3200 type memory? Because thats what I bought....
If you guys can help me, THANKS!!!!!!!!!
